Q40 Tape Library
Installation and Operations Manual
511026 Rev. 07-01-19
98
6.7.5 Wellness Test
The wellness test performs a general health check of the library by running the following tests:
Basic Hardware Review
Robotics Initialization Test
Barcode Scanning Test
Move Media Test
•
Running the test requires at least one enabled and functional drive and one cartridge with a barcode
label in each module
.
•
After the test has been started the
Stop Test
button is active. Clicking the button will abort the
wellness test but not before the current test has been completed.
•
During the test the library is offline.
CAUTION
The test can move cartridges between partitions.
•
The Info column notifies the user about the status and result of each test.
To run the Wellness test, navigate to the
Maintenance > Library Tests > Wellness Test
screen, and
then click
Start Test
.
NOTE
For best results, it is recommended to have one functional drive in each module
and 8 compatible data cartridges in the corner slots of the same module
.