511026 Rev. 07-01-19
75
•
Library Time & Date
– helpful when analyzing event logs and support tickets, and might be needed
when contacting support.
•
User
– The user account for this session.
•
Logout
– Logs out of this session.
•
?
-
– Accesses online help.
6.1.2 Left Pane Elements
•
Library Status
– Overall library status
•
Serial #
– The Base Module serial number
•
Hostname
– The library hostname
•
Network Configuration
– The IP version (IPv4 or IPv6) and IP address
•
Firmware
– The library firmware version
•
Module Status Overview
– A summary of each module’s configuration and health. Click the module
status area to select the module.
•
Module Health Icon
•
The green check mark icon indicates that the module is fully operational and that no
user intervention is required.
•
The yellow triangle explanation point icon indicates that user attention is necessary,
but that the library can still perform most operations.
•
The red circle X icon indicates that user intervention is required and the module is not
capable of performing some operations
.
•
Module Number – Modules are numbered based on their location in the physical library. The
bottom module is
Module 1
. The Base Module is annotated with (
Base
).
•
Drive Status – The number of drives installed in each module and the health of each drive.
Click on the drive to display drive configuration and status information in the center pane.
•
A black square indicates that the drive is fully operational and that no user
intervention is required.
•
A yellow square indicates that user attention is necessary, but that the drive can still
perform most operations.
•
A red square indicates that user intervention is required or the drive is not capable of
performing some operations.
•
Magazine Slot Usage – The number of cartridge slots available and the number in use.
•
Drive Operation Status – The current drive activity for each drive in the module. The drive
operation status is only displayed for the selected module.
•
Write – The drive is performing a write operation.
•
Read – The drive is performing a read operation.
•
Idle – A cartridge is in the drive but the drive is not performing an operation.
•
Empty – The drive is empty.
•
Encryp – The drive is writing encrypted data.
