511026 Rev. 07-01-19
81
6.3.2 Configuring SNMP
Use the
Configuration > Network Management > SNMP
page to enable and configure SNMP (Simple
Network Management Protocol), which allows applications to manage the device. The library supports
both SNMP configuration and SNMP traps.
•
SNMP Enabled
– When checked, the library can be managed by computers listed in the SNMP
Target IP Addresses field.
•
Community Name
– A string used to match the SNMP management station and library. It must be
set to the same name on both the management station and the library. The default community name
is
public
.
•
SNMP Targets
– List of configured SNMP targets.