11
INSTALLATION CHECKLIST
o
Safety eye glasses MUST be worn whenever installing or servicing this system.
o
Before installation, inspect the underside of vehicle floor, note utilities, frames, cross-members, fuel tanks and other possible
obstructions—any questions contact the vehicle OEM.
o
Vehicle anchor points may require reinforcement. The installer or manufacturer is responsible for ensuring anchorages
are installed into suitable floor structures. Floor strength MUST meet specific regulations, standards and applicable
performance requirements from local transportation authorities.
o
Do NOT install anchorages or any system components into faulty materials such as corroded metal, wood, plastic or
fiberglass panels.
o
The floor and shoulder belt anchorages MUST be installed onto a flat and durable surface.
o
Only use Hardware with a minimum Grade 8 (M8-1.25x16) (10.9 metric), which meets ASTM F835, SAE J429 or ASTM 574
specifications (depending on head style and drive), and coated for adequate protection against corrosion per ISO 7253 or
ASTM B117 or per customer requirements.
o
ONLY use minimum Grade 8.8, M8-1.25x16 Bolts for the INQLINE SECUREMENT™. Bolt length = all material thi 0.34”
(8.64mm). DO
NOT exceed this length.
o
Modifications to Backing Plate MUST only be made where necessary as a smaller plate size reduces the floor load
distribution. Always leave a minimum of .6” (15mm) adjacent the bolt hole in the plate.
INSTALLATION INSTRUCTIONS
COMPLETE INQLINE SECUREMENT™ SECUREMENT SYSTEM
Left INQLINE SECUREMENT Retractor
Right INQLINE SECUREMENT Retractor
QRT Retractors with Slide 'N Click
Wall or Panel
Wall Control Panel
Thumb Controller
Hook Hangers
Summary of Contents for INQLINE
Page 31: ......
