4
• Always read, understand, and follow the instructions and warnings stated within this manual. Contact your nearest
Q'STRAINT® office with any questions regarding the installation, operation, troubleshooting, maintenance, or general
servicing of the INQLINE SECUREMENT™ Integrated Winch & Retractor Securement System (hereinafter referred to as
INQLINE SECUREMENT™ System).
• This manual provides an instruction guide for the installation of the INQLINE SECUREMENT™ System. Do
NOT
alter,
modify, interchange or substitute any Q'STRAINT® components as the INQLINE SECUREMENT™ System and all related
component are designed and tested to work as one cohesive system and MUST be suitable for your particular application.
Any deviation, alterations, or improper installation of the INQLINE SECUREMENT™ System may result in personal injury.
• All equipment and components
MUST
be installed and serviced by an experienced and trained technician. We
recommend the use of safety eye glasses, and other injury preventive measures, whenever installing or servicing this
system.
• Inspect and verify the underside location of the vehicle floor, utilities, frames, cross-members, fuel tanks and other
possible obstructions that may effect the proper installation of the INQLINE SECUREMENT™ System. Do
NOT
install
anchorages or any other system components into faulty or non-durable materials such as corroded metal, wood,
plastic, or fiberglass panels. The INQLINE SECUREMENT™ System and vehicle anchor points may require additional
reinforcement. The installer is responsible for ensuring that anchorages are installed into a structure that conform to
applicable regulations, standards, and performance requirements.
• Do
NOT
attempt to repair or modify the INQLINE SECUREMENT™ System or any of its components. Unless otherwise
stated,
ONLY
use Q'STRAINT® components with this system. Do
NOT
mix parts and components from other
manufacturers, and do
NOT
use if any components are missing, defective or if the webbing is cut, frayed, burnt, melted,
or abraded.
• The INQLINE SECUREMENT™ System is dynamically crash tested at 30MPH (48KPH), 20G in the forward facing
direction using a Surrogate Wheelchair (SWC) weighing 187LBS (85KG) to 440LBS (200KG) and a 168LBS (76KG)
Anthropomorphic Test Device (ATD). The ATD is secured using a compliant Occupant Restraint System that includes a
Shoulder and Pelvic Belt.
• The INQLINE SECUREMENT™ System is statically tested (Winch Straight Line Pull) on a 16° simulated ramp and a
combined mass of 608LBS (276KG).
• The permanent Placard which provides a general guideline for the proper use and operation of the INQLINE
SECUREMENT™ System and, if applicable, the manual override, must be posted in a visible location close to the installed
device.
• Contact Q'STRAINT® in the event that the vehicle’s dimensions are outside the testing or recommended installation
instructions.
IMPORTANT INSTALLATION REQUIREMENTS
SAVE THESE INSTRUCTIONS
Summary of Contents for INQLINE
Page 31: ......
