7
SYSTEM CHECKLIST
ELECTRICAL REQUIREMENTS
Power Supply
•
All equipment and components must be installed and serviced by an experienced and trained technician.
•
Connection to be 12Vdc using a 30 amp fuse b terminal of battery and controller.
q
2 INQLINE SECUREMENT™ Retractors (Washers and
Bolts not Included) ONLY use minimum grade 8.8,
M8 - 1.25x16 Bolts, Bolt length = all material thi
0.34” (8.64mm). Quantity: 6
q
1 Thumb Controller with Cord and Wall Mount
(screws not included)
q
1 Wall Control Panel (screws not included)
q
1 Main Control Box (screws and washers not included)
q
2 (10 ft.) Wire Harnesses
q
1 (10 ft.) Wall Unit Wire Harness
q
1 Split Wire Harness
q
2 Hook Hangers
The following parts make up a complete INQLINE SECUREMENT™ Wheelchair Securement System. If any
questions arise, call your nearest Q’STRAINT ® authorized dealer or office.
q
QRT Retractors (Compliant with RESNA WC-4, Section 18
and ISO-10542-1)
q
2 OMNI® Slide ‘n Click
®
Floor Anchorages
q
1 Occupant Securement System
(will vary depending on vehicle's model)
(Sold Separately)
q
1 INQLINE SECUREMENT™ Installation Manual
q
1 INQLINE SECUREMENT™ User Placard
q
1 INQLINE SECUREMENT™ Use and Care Manual
q
1 Warranty Card
INQLINE SECUREMENT™ Wheelchair Securement System
Wall Pouch
q
Q'STRAINT® Wall Pouch and Hardware
(Optional –
Sold Separately
)
SOLD SEPARATELY
Summary of Contents for INQLINE
Page 31: ......
