18
INQLINE SECUREMENT™ SYSTEM INSTALLATION
11.
Connect Right INQLINE SECUREMENT™ Wire Harness
to slots J6 (for positive wire) and J7 (for negative wire).
Connect Left INQLINE SECUREMENT™ Wire Harness
to slots J8 (for positive wire) and J9 (for negative wire)
(L).
Make sure the positive wires are connected to the
positive terminals and the negative wires are connected
to the negative terminals. Not following this procedure
will damage the Main Control Box.
12.
Connect the Split Wire Harness to both Retractor Wire
Harnesses
(M).
13. Connect the Main Control Box negative wire (J5) to the
negative terminal on the Vehicle Battery; and the Main
Control Box positive wire (J4) to the positive terminal
on the Vehicle Battery
(N).
Make sure to connect the negative wire first before
connecting the positive wire. Also, make sure the positive
wire goes through a 30 amp fuse. Failure to follow these
procedures, will damage the Main Control Box.
Complete Electrical Routing (
P
).
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
L
M
N
P
Vehicle Interlock
Vehicle Battery
Vehicle Interlock
Vehicle Battery
Vehicle Interlock
Vehicle Battery
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Interlock
Vehicle Battery
To J6 - J7
To J8 - J9
Left
Right
J6 = Motor 1 +
J7 = Motor 1 -
J8 = Motor 2 +
J8 = Motor 2 -
Summary of Contents for INQLINE
Page 31: ......
