27
TROUBLESHOOTING
IMAGE
ANSWER
The retractor webbing
is slacking.
PROBLEM
Pull the J-Hook and slowly release to retract
webbing or turn the Retractor Knob on
either side of retractor to remove slack.
The retractor(s) is (are) not
working.
Call Q'STRAINT® authorized dealer.
It's an Emergency
and Occupant Securement is
locked down and it’s not
releasing the wheelchair
occupant.
Detach Pelvic Belt Pin Connector from
Retractor Pin or cut the Pelvic Belt webbing
at an angle. (Use Q'STRAINT®
Emergency Cutter)
It's an Emergency
and retractors are locked down
and not releasing the J-Hooks.
Press Reset Button and push Thumb
Controller downward. If Retractors do not
release the J-Hooks, cut webbings at an
angle (Use Q'STRAINT® Emergency Cutter).
OR
In Case of Power Failure:
Push the Reset Button and see if the
INQLINE SECUREMENT™ power comes back
on. Also, check the INQLINE SECUREMENT™
fuse to make sure it’s working. If the fuse is
not working, replace it.
Cut Webbing
OR
Summary of Contents for INQLINE
Page 31: ......
