Q'STRAINT INQLINE, Installation Manual

Page: 25 / 32

25
TROUBLESHOOTING
IMAGE ANSWER
The webbing is twisted inside
the front retractor.
PROBLEM
Press and hold both buttons for about 4
seconds to release front retractors. Then pull
J-Hook until you find twisted webbing and
straighten the webbing.
The webbing is twisted inside
the back retractor.
Press lever and pull J-Hook until you find
twisted webbing and straighten the webbing.
The Front Retractors locked
down before wheelchair was
secured.
When Unlock Button was
pressed the Front Retractors did
not release.
Press Reset Button (2 blinking red lights
and 2 solid green lights), push downward
the Thumb Controller until wheelchair
moves back a couple of inches, stop and
continue process.
Press and hold both buttons for about 4
seconds to release front retractors and then
continue.
Blinking Red Lights
Blinking Green Lights
Rear Retractors are not releasing
the J-Hooks.
Press and hold Unlock Button for about 10
seconds to release retractors. Then press
levers and detach rear J-Hooks.