Q'STRAINT INQLINE, Installation Manual

Page: 10 / 32

10
LAYOUT RECOMMENDATIONS
Frontal Clear Zones (FCZ) = 26” (660mm) with Shoulder Belt
We recommend using Shoulder and Lap Belts to reduce the possibility of head and chest impacts with vehicle
components. FCZ may not be achievable with wheelchair-seated drivers.
Top View
Layout for All Anchorages
AND
Please CONTACT Q'STRAINT in the event that the vehicle’s dimensions are outside the recommended installation instructions.
45º
30º
40º
60º
32º
20º
27 ”
( 685 mm)
34 ”
(
865
mm)
13 ”
( 330 mm)
15 ”
( 380 mm)
6º
11º
Please CONTACT Q’Straint® in the event that the vehicle’s geometry is outside the recommended installation instructions.
REAR VIEW SIDE VIEW FRONT VIEW
48 ” - 54 ”
( 1220 mm - 1370 mm)
Wheelchair
Reference Plane
Wheelchair
Reference Plane
Front
Securement Points
Rear
Securement Points
From 40” (1016mm) for 6-Year Old Child)
To 61” (1549.4mm) for a Tall Adult
8
FCZ
8
17.72” (450mm)
Side View
8
8” (200mm)
8
8” (200mm)
8
16” (450mm)
8
FCZ
Wall
19” (483mm) Max
2" - 5" (51mm - 127mm)
13” (330mm) - 15” (380mm)
48” (1220mm) - 54” (1370mm)
27” (685mm) - 34” (865mm)
Shoulder Belt Anchorage
Floor Anchorage
From Webbing Center Line
In the event that rigid vehicle components exist within the wheelchair designated “clear zone”, they should be covered with
padding that conforms to the impact performance requirements of FMVSS 201 or ECE R 21.