Instructions
Adjustable Shower Stool
Item # 522-9801-1900
Assembly Instructions
1. Place the round seat (4) upside down on a
flat surface.
2. Align the support legs (1 and 2) to the seat. Using
the screw knob (a) and a bent washer (b),
hand tighten securely in the center of the seat.
3. Align the remaining holes on the seat with the
remaining holes on the legs. Use the screw knobs
(a) and straight washers (c) to secure the legs to
the seat.
4. Adjust the extension legs in 1” increments to the
desired height, and lock the pins into place.
Caution:
Make sure all screw knobs are tightened
securely. Do not overtighten as it could strip the
threads. For your safety, the four extension legs
must always be locked in the same height position.
All pins must be pushed completely through the
pinholes before using.
Note:
If any parts are missing, do not return to the
place of purchase, call 800.622.4714.
Warning:
Do not use if any parts appear to be loose
or damaged as personal injury may result.
CAUTION
This product contains natural rubber latex, which
may cause allergic reactions.
Manufactured for:
Briggs Medical Service Company
1931 Norman Drive
Waukegan, IL 60085
Made in China
#910-9801-1900 05/11
© 2011 Briggs Medical Service Company
Toll-Free Customer Care Help Line: 800.622.4714
Monday – Friday 8 a.m. to 6 p.m. EST
Assembly Codes
1 – Support Leg (1)
2 – Support Leg (1)
3 – Round Seat (1)
a – Screw Knobs (5)
b – Bent Washers (1)
c – Straight Washers (4)
Weight Capacity: 225 lbs.
3
2
1
a
a
a
a
a
b
c
c
c
c