Q4: Get/Set VOX Enable
Set:
Set VOX enable: 1 enables VOX, 0 disables VOX. The setting is for the current operating
session only and is not written to EEPROM.
Get:
Get VOX enable; 1 = Enabled, 0 = Disabled
Q5: Get/Set TX Rise Threshold
Set:
Set TX Rise Threshold, which should be a percentage number between 0 and 99 (see
description elsewhere in this manual). The default setting of 80 is normally appropriate. The
setting is for the current operating session only and is not written to EEPROM.
Get:
Get TX Rise Threshold value
Q6: Get/Set TX Fall Threshold
Set:
Set TX Fall Threshold, which should be a percentage number between 0 and 99 (see
description elsewhere in this manual). The default setting of 60 is normally appropriate. The
setting is for the current operating session only and is not written to EEPROM.
Get:
Get TX Fall Threshold value
Q7: Get/Set Cycle Min parameter
Set:
Set Cycle Min parameter (see description elsewhere in this manual). The setting is for the
current operating session only and is not written to EEPROM.
Get:
Get Cycle Min parameter value
Q8: Get/Set Sample Min parameter
Set:
Set Sample Min parameter (see description elsewhere in this manual). The setting is for the
current operating session only and is not written to EEPROM.
Get:
Get Sample Min parameter value
Q9: Get/Set Discard parameter
Set:
Set Discard parameter (see description elsewhere in this manual). The setting is for the
current operating session only and is not written to EEPROM.
Get:
Get Discard parameter value
QA: Get/Set IQ Mode
Set:
Set IQ Mode: 1 enables IQ Mode, 0 disables IQ Mode. In IQ Mode, the raw I & Q samples
from the ADC are streamed directly to the USB Sound card. The setting is for the current
operating session only and is not written to EEPROM.
Get:
Get IQ Mode; 1 = Enabled, 0 = Disabled
QB: Get/Set Japanese Band Limits mode
Set:
Set Japanese Band Limits mode: 1 enables Japanese band limits, 0 disables Japanese band
limits. In Japanese Band Limits mode, QDX cannot transmit outside the allowed Japanese
band limits. The setting is for the current operating session only and is not written to EEPROM.
Get:
Get Japanese Band Limits mode; 1 = Enabled, 0 = Disabled
QDX operating manual; firmware 1_04
30
