The final step in the enclosure assembly is the addition of the four self-adhesive rubber cabinet
feet on the bottom, one in each corner. See photograph below.
6
CIRCUIT EXPLANATION
The designer, Hans Summers G0UPL explains some of the details behind the circuit and choices
made in the design and production of the kit.
In this section I will provide an explanation of the circuit sections, including design choices. Some
of the design choices are made by a large number of experiments to determine the optimum
configuration and component values experimentally.
6.1 Schematic
The schematic is shown on the following page.
50W QCX PA kit assembly
1.00q
42
