3.35 Install LEDs D11 and 12
D11 is a 3mm Green LED (DC Power on) and D12 is a 3mm Red LED
(Transmit).
Identify the wire which is next to the flat on the LED body. This is also the
shorter of the two wires. Bend this wire 90-degrees down, right at the body of
the LED. Then bend the other wire down also, but at a distance of 0.1-inches
from the LED body. Do the same thing for both LEDs.
Install the LEDs as pictured, sitting with their flats right on the PCB. This will ensure that if used
with the optional QRP Labs enclosure, the LEDs will align perfectly with the holes in the enclosure
front panel.
Hopefully the assembly now looks something like this:
50W QCX PA kit assembly
1.00q
34
