QMS PS 410, User Manual

Page: 191 / 288

setfontcachesize†
Syntax: integer setfontcachesize
Function Permits the user to configure the size of the font cache.
Special Note The buffer may not be configured to be smaller than the
minimum size. The buffer may not be configured so that
it causes the serial, parallel and AppleTalk buffer sizes,
or virtual memory to be smaller than their minimum
sizes. Also, you must cycle the printer off and on for
this command to take effect.
WARNING! The user should use extreme care when configuring
memory buffers. All memory is added or removed from
Virtual Memory and, therefore, could prevent complex
jobs from working.
Default size = 153600 bytes
Minimum size = 102400 bytes
Maximum size = limited to available memory
Chapter 10
P o s t S c r i p t : O p e r a t o r D i c t i o n a r y 1 0 - 2 1