QMS PS 410, User Manual

Page: 185 / 288

emulation
Syntax: integer1 emulation integer2
Function Returns the current emulation for the specified
interface.
Errors rangecheck, stackoverflow, stackunderflow, typecheck
setemulation†
Syntax: integer1 integer2 setemulation
Function Sets the current emulation for the specified interface
port. Remains in effect until reset. This command may
be used inside the server loop.
Special Note This feature works for all interface ports. Selecting an
emulation that is unsupported on a specific host may
cause undesired results (for example, selecting HP PCL
for AppleTalk).
Format Integer 1 = Ø: serial
1: parallel
2: AppleTalk
Integer 2 = Ø: PostScript
5: HP PCL (Series II)
200: ESP
4: HP-GL (optional card)
12: LN03 (optional card)
Errors invalidaccess, rangecheck, stackunderflow, typecheck
Chapter 10
P o s t S c r i p t : O p e r a t o r D i c t i o n a r y 1 0 - 1 5