QMS PS 410, User Manual

Page: 163 / 288

Switching Cassettes (Tray chaining)
You can set your printer to switch to the other cassette
automatically when the current cassette is out of paper; this is called
chaining. You must have the same size paper in each tray to enable
chaining. To specify chaining, send the following command:
Tray chaining becomes a default (automatic) function after the
printer is powered off and back on. To disable chaining, the
command is false setdefaulttrayswitch.
NOTE: The PS Executive Series Utilities program may be used
to configure the paper trays (if you are using the IBM PC
or compatibles).
C:\> edlin filename
New file
*i
1:*serverdict begin Ø exitserver
2:*statusdict begin
3:*true setdefaulttrayswitch
4:*^D
5:*^Z
*ex
C:\>
Chapter 9
P o s t S c r i p t : T e c h n i c a l O v e r v i e w 9 - 7