QMS 2025, Administrator'S Manual

Page: 67 / 158

Serial
Communication
4-7 Administration/Communications Submenu
If the Spool Timeout value expires before the printer has received all
data for a job it is spooling, the printer terminates the spooled print
job.
End Job Mode
This option selects the End of Job terminator to be used for the serial
interface without consideration for interacting timeouts. There are
three choices available: None, QMS EOD (%%EndOfDocument), and
HP EOD (<ESC>%-12345X). Only one form of EOD can be used at a
time. The default is QMS EOD. Refer to
QMS Crown Network Notes
for more information on End Job Mode.
Def Job Prio
The Def Job Prio (Default Job Priority) option determines which jobs
are printed first, according to the interface from which they are
received, when jobs are received simultaneously. The range is from
001 to 100 with 001 being the first job. The default is 001.
Baud Rate
Baud Rate is the data transmission rate used by the host. The baud
rate options are 300, 600, 1200, 2400, 4800, 9600, 19200, and
38400. The default value is 9600. Set this option to match the baud
rate used by the host.
» Note: Baud rates 19200 and 38400 require RTS/CTS protocol (see
“Hdwe Flow Ctl,” later in this section).
Parity
The Parity option allows you to choose the type of parity checking
performed by the host. Parity acts as a check bit to identify data trans-
mission errors. The options are None, Mark, Space, Odd, or Even.
The default value is None. Set this option to match the parity used by
the host.