QMS 2025, Administrator'S Manual

Page: 22 / 158

QMS 3825/3225/2025 System Administrator’s Guide 1-12
Changing Default
Configuration
Settings
5 Press the Select key again. This opens the Communications
menu.
COMMUNICATIONS
now displays on the first line of the
message window:
COMMUNICATIONS
TIMEOUTS
6 Press the Next key until
SERIAL
displays on the second line:
COMMUNICATIONS
SERIAL
7 Press the Select key to open the Serial submenu:
SERIAL
MODE
8 Press the Next key until
BAUD RATE
displays:
SERIAL
BAUD RATE
9 Press the Select key. The first choice in the set of baud rate
values displays on the bottom line. This value is also the cur-
rent default setting:
BAUD RATE
*9600
10 Press the Next key until the value you want (for example,
2400) displays:
BAUD RATE
2400
11 Press the Select key. The message window displays a con-
firmation message for three seconds:
2400
IS SELECTED
12 Then, the message window displays the option’s name:
SERIAL
BAUD RATE
You have now changed the baud rate to 2400. The change does not