QMS 2025, Administrator'S Manual

Page: 30 / 158

QMS 3825/3225/2025 System Administrator’s Guide 1-20
Upgrading Print
System Software
6 Disk 6 is the printer’s internal hard disk. Press the Select
key. The following message displays:
INSTALL TO DISK
CONNECTING....
7 Go to your host computer and send the system software.
The software is installed when the following message
appears:
INSTALL TO DISK
COMPLETE
8 Once you have completed installing the system software,
you are ready to boot the system. Return to your printer and
press the Menu key. The message window displays the fol-
lowing message:
QMS SOFTLOAD x.x
INSTALL TO DISK
9 Press the Next key until the message window displays the
following message:
QMS SOFTLOAD x.x
BOOT SYSTEM
10 Press the Select key to enter the Boot System submenu. The
following message appears in the message window:
BOOT SYSTEM
HARD DISK
11 Press the Select key and the following message appears:
BOOT SYSTEM
HARD DISK 6
12 Hard disk 6 is the internal hard disk. If you have any external
hard disks connected you can cycle through them by press-
ing the Next key. For this example we are using the internal