QMS 2025, Administrator'S Manual

Page: 127 / 158

Engine
Submenu
8-7 Engine, Miscellaneous, and Disk Operations Submenus
Rotate Duplex
This option, which appears only when the optional duplexing unit is
installed, rotates the image 180
°
to accommodate duplex printing on
pre-punched letterhead paper. Feeding prepunched paper with the
punched edge first can cause paper jams. If you set rotate duplex to
No, you can feed the paper face down with the un-punched edge first.
The options are No and Yes and the default is Yes. See the chart
below for further information.
Rotate Duplex Letterhead Effect
Yes Off For use with plain paper where simplex
and duplex jobs are not mixed.
Simplex jobs print with top away from
you as you stand at the control panel;
duplex jobs print with the top toward
you, so sorting is required.
This is the default setting and allows the
fastest printing speeds.
Yes On For use with letterhead paper.
Load face down with top toward you (as
shown above). Both simplex and duplex
jobs print with the top toward you so no
manual sorting is required, but print
speed is reduced.
No On For use with prepunched letterhead.
Load paper face down with top away
from you. Both simplex and duplex jobs
print with the top away from you, so no
manual sorting is required, but print
speed is reduced.
No Off For use with plain paper where simplex
and duplex jobs are mixed.
Simplex and duplex jobs print with the
top away from you so no sorting is
required.
Print speed is normal for simplex jobs.