QMS 2025, Administrator'S Manual

Page: 23 / 158

Changing Default
Configuration
Settings
1-13 Introduction
take effect until you save the changes and place the printer back on
line. Review “Saving Printer Configuration Changes” later in this
chapter.
Alphanumeric Values
When an option requires a value, you enter the value one digit or
character at a time. You use the Next and Previous keys to increase
or decrease the displayed character or digit value. Spaces can also
be used when a value, such as a password, must be an exact number
of characters. The Copies option in the Operator Control menu is an
example of an option that requires a value. The following instructions
show how to change a value:
1 Press the Online/Offline key to take the printer off line.
2 Press the Menu key. The following message displays in the
message window:
CONFIGURATION
OPERATOR CONTROL
3 Press the Select key to open the Operator Control menu.
OPERATOR CONTROL
now displays on the first line of the
message window:
OPERATOR CONTROL
COPIES
4 Press the Select key again to display the current value:
COPIES
001
5 Notice that the first digit is flashing. (The default copy count
is 1.) You may select any number of copies up to 999. For
this example, we are setting the copy count to 159.