QMS 2025, Administrator'S Manual

Page: 134 / 158

The Disk
Operations
Submenu
QMS 3825/3225/2025 System Administrator’s Guide 8-14
8 Press the Select key to select the address.
The display prompts you to insert one of the disks containing the
optional emulation in the printer’s floppy disk drive.
9 Insert the disk.
The message window displays
READING DATA
until the contents
of the disk have been copied to the hard disk. When the copy pro-
cess finishes, the message window displays
INSTALL COM-
PLETE
.
10 Press the Menu key to return to the Install Option selection.
11 Press the Online/Offline key to prepare the printer for receiv-
ing data from the host.
12 Turn the printer off and back on again.
The printer must be rebooted to complete the installation.
Procedure for Using the Printer’s Parallel or
Serial Port
If necessary, connect the PC to the printer’s parallel or serial port.
1 Turn on the printer, and wait for
IDLE
to appear in the mes-
sage window.
2 Insert the emulation disk in your PC’s 3.5" disk drive, and at
the DOS prompt change to that drive (for example, if you’re
using the A drive, type
a:
↵
).
3 Send the emulation to the printer’s hard disk.
» Note: If more than one hard disk is available, the emulation
automatically installs itself on the disk with the most free
storage space.
■
If your PC and printer are connected through the parallel port,
type
copy /b *.ps lpt #
↵
where
#
is 1 to 3 and /b refers to binary files.