Qlogic QLA2 Series, User Manual

Page: 206 / 348

4–Non-Interactive Commands
Command Summary
4-32 SN0054614-00 K
„ Link Failure —Number of link failures
„ Loss of sync —Number of sync loss errors
„ Loss of signal —Number of signal loss errors
„ Invalid CRC —Number of invalid CRCs
-l
(Display LUN Info)
This command shows LUN information for:
„ All adapters
„ A specific target
„ A specific LUN on a specific target
To show the LUN information for all target devices for a specific adapter Instance ,
type:
# scli -l (< hba instance > | < hba wwpn >)
To show the LUN information for a specific device for a specific adapter port, type:
# scli -l (< hba instance > | < hba wwpn >) (< target port id > |
< target wwpn >)
To show the LUN information for a specific LUN on a specific target device for a
specific adapter port instance, type:
# scli -l (< hba instance > | < hba wwpn >) (< target port id > |
< target wwpn >) < lun id >
Where:
-ls
(Display Link Status)
To view the link status, type:
# scli -ls
(
< hba instance > | < hba wwpn >) [(< param name > |
< param alias >) < param value >]
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target port id = Port ID of the target
target wwpn = World wide port name of the target
lun id = ID of the LUN