Qlogic QLA2 Series, User Manual

Page: 212 / 348

4–Non-Interactive Commands
Command Summary
4-38 SN0054614-00 K
Where the file name is
systemLUNinfo
, all messages are located in the
directory indicated for the system platform:
-p
(Display Persistent Target Binding Info)
With this command you can:
„ Show binding information for one or on all adapters
„ Bind a specific target to a selected adapter
„ Bind all targets on a specific adapter or on all adapter
„ Unbind a specific target
„ Unbind all targets on a specific adapter or on all adapters
To show target persistent binding information for a specific adapter port, type:
# scli -p (< hba instance > | < hba wwpn >) (view | ?)
To show persistent binding information for all adapters, type:
# scli -p all (view | ?)
Where:
Windows:
syslog.log
in the current directory
Linux:
/var/log/messages
Macintosh:
/var/log/system.log
Solaris:
/var/adm/messages
NOTE:
„ Under Solaris, if you use the driver from the OS installation CDs (QLC
driver), these features are disabled.
„ Under Linux, if you use the IOCTL or sysfs (inbox) driver these features
are disabled.
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
NOTE:
In Solaris SPARC using a csh or tsch shell, include double quotes around
the question mark (?). For example:
# scli -p < HBA > "?"