Qlogic QLA2 Series, User Manual

Page: 316 / 348

D–Help Commands
D-4 SN0054614-00 K
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
Configures the operating system to boot
from a specific target:
„
prim
: Primary Boot Port Name
„
alt1
: Alternate 1 Boot Port Name
„
alt2
: Alternate 2 Boot Port Name
„
alt3
: Alternate 3 Boot Port Name
–e ( view | ? )
Shows the current boot device information
on all adapters.
–e ( view | ? )
Shows the current boot device information
on all adapters.
–ei –
Lists the exit codes.
–f <file name>
Executes from a command input file.
Option
–f
cannot be combined with any
other options.
-fcoe ( <hba instance> | <hba wwpn> )
--info
Shows current FCoE firmware version.
-fcoe ( <hba instance> | <hba wwpn> )
--getparam --port
x
Shows FCoE parameters of specified port.
-fcoe ( <hba instance> | <hba wwpn> )
--setparam --port
x ( { <param
name> | <param alias> ) <param
value> }
Modifies FCoE parameters of specified
port.
-fcoe ( <hba instance> | <hba wwpn> )
--loadfw <firmware file>
Updates FCoE firmware.
-fcoe ( <hba instance> | <hba wwpn> )
--mon --nsl --port
x
Shows FCoE network interface statistics of
specified port.
-fcoe ( <hba instance> | <hba wwpn> )
--log --list
Shows FCoE available log IDs.
-fcoe ( <hba instance> | <hba wwpn> )
--log --id <logid>
Shows the log specified by the log ID.
–fg ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current driver settings.
Table D-2. Help Commands (Continued)
Command
Line Action
Arguments Function