Qlogic QLA2 Series, User Manual

Page: 221 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-47
To save the current adapter firmware preload table to a
DAT
file, enter the
following command:
# scli -u ( < hba instance > | < hba wwpn > ) save < file name >
Where:
„
< hba instance >
is the adapter instance number of an adapter port.
„
< hba wwpn >
is the world wide port name (WWPN) of an adapter port.
„
< file name >
is the name of the firmware preload table
DAT
file.
-v
(Display Version)
To show the version number of the SANsurfer FC/CNA HBA CLI tool, type:
# scli -v
The system shows the following information:
SANsurfer FC/CNA HBA CLI
v1.
x . x Build x
Copyright 2003-2009 QLogic Corp.
All rights reserved.
Command Line QLogic FC Host Bus Adapters.
Build Type: Release
Build Date:
xx / xx / xxxx xx : xx : xx AM
-vp
(Virtual Port)
To list all virtual ports on a physical adapter port, type:
# scli -vp (< hba instance > : < hba wwpn >) list all
Where:
To list a specific virtual port on a physical adapter port, type:
NOTE:
This option is valid only in non-interactive mode.
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
vport wwpn = World wide port name of the virtual port
vport hex = World wide port name of the virtual port with the two
hex digits in byte three supplied by the user