Qlogic QLA2 Series, User Manual

Page: 112 / 348

3–Interactive Commands
Boot Device Menu (Command Line Option -e)
3-60 SN0054614-00 K
Please reboot the system for the saved configuration to become
effective.
Boot Device Menu
(Command Line Option -e)
8: Boot Device
When you select this option, SANsurfer FC/CNA HBA CLI shows the standard
HBA Port Instance menu (see “HBA Port Instance” on page 3-49 ) allowing you to
select an individual adapter port or All HBAs .
HBA Port Instance
8: Boot Device 1 - m: HBA Port Instance
When you select this option, SANsurfer FC/CNA HBA CLI shows the Boot
Device Settings menu for adapter instance m . You can choose to:
„ Display Boot Device(s)
„ Configure Boot Device(s)
Boot Device(s) (Per Adapter Port)
8: Boot Device n: Port Number 1: Display Boot Device(s)
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about the boot devices for this adapter instance:
„ Adapter Instance Number
„ Adapter Model Number (QLAxxxx)
„ Port Number (on that adapter)
„ WWPN
„ Port ID
„ Boot Device Settings
„ Selectable Boot (Enabled/Disabled)
„ Primary Boot Port Name (WWPN) and LUN
„ Alternate 1 Boot Port Name and LUN
„ Alternate 2 Boot Port Name and LUN
„ Alternate 3 Boot Port Name and LUN
For example:
NOTE:
The Boot Device Menu option is not supported on Red Hat or Novell
PowerPC64.