Qlogic QLA2 Series, User Manual

Page: 143 / 348

3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
SN0054614-00 K 3-91
LogToFile (LF): null.csv
5. To restore the adapter defaults, select Restore Default , and then press
ENTER. The following message appears:
Resetting to default settings..., done.
6. To change the polling, select Auto Poll , and then press ENTER. Then select
either Auto Poll or Manual Poll , and then press ENTER to enable that
selection.
7. To change the sampling rate, select Set Rate , and then press ENTER. You
are prompted to enter a rate value between 5 and 30 seconds; the current
rate is shown in parentheses. Type a new rate, and then press ENTER to
update the sampling rate.
8. To save the adapter statistics to a file, select Log to File , and then press
ENTER. Type the name of a
.csv
file to save to, and then press ENTER.
Table 3-11 shows the values for the adapter port statistics options.
Current Settings
13: Statistics 1: HBA Statistics 1: Configuration 1: Current Settings
The system shows the current settings for:
„ AutoPoll (AP)
„ SetRate (SR)
„ LogToFile (LF)
Restore Defaults
13: Statistics 1: HBA Statistics 1: Configuration 2: Restore Default
The system restores the default settings and returns a message:
Table 3-11. Adapter Port Statistics Options
Parameter
Name
Alias Value Description
AutoPoll AP
0 Turn on automatic updates of the adapter
port statistics.
1–256 Turn on automatic updates of the adapter
port statistics at a specified interval.
SetRate SR
5–30 Set the polling interval during automatic
update (seconds).
LogToFile LF
Log File
Name
Export the statistics to a file (CSV format).