Qlogic QLA2 Series, User Manual

Page: 313 / 348

SN0054614-00 K D-1
D
Help Commands
Table D-2 is an alphabetic listing of the Help commands. Unless otherwise noted,
only one command line option per input file is valid. The hyphen (
-
) and slash (
/
)
characters are equivalent. For example,
scli -g
and
scli /g
are both valid
commands.
Table D-1 describes each variable used in the command line arguments shown in
Table D-2 .
Table D-1. Variables Used in Arguments
Variable Description
<address>
IP address.
<hba instance>
Adapter instance number of an adapter port.
<hba wwpn>
World wide port name of an adapter port.
(
xx-xx-xx-xx-xx-xx-xx-xx
or
xxxxxxxxxxxxxx
).
<enable value>
Enable value:
1
for enable or
0
for disable.
<file name>
Firmware preload table
.dat
file
<lock value>
Lock value:
1
for lock or
0
for unlock.
<log id>
FCoE log ID (0– x ).
<lun id>
Logical unit number of a LUN.
<lun name>
Persistent device name assigned to the designated LUN.
<percent>
Value of bandwidth percent.
<priority>
Priority value: low, medium, or high.
<speed>
Link speed.
<target id>
ID of a target device.
<target portid>
Port ID of a target device. (
xx-xx-xx
or
xxxxxx
).
<target wwnn>
World wide node name of a target device.
(
xx-xx-xx-xx-xx-xx-xx-xx
or
xxxxxxxxxxxxxx
).