Qlogic QLA2 Series, User Manual

Page: 17 / 348

Preface
License Agreements
SN0054614-00 K xvii
„ Text in ALL CAPITALS indicates the name of a key that you press on the
keyboard. For example:
Type the number for Host Information and then press ENTER.
„ Italicized text indicates either a document reference, glossary term, or
emphasis. For example:
Attached Port means a QLogic adapter....
For a complete list, see the QLogic SAN Interoperability Guide .
„ Italicized text within angle brackets indicates user-defined variables. For
example:
# scli -k ( < hba instance > | < hba wwpn >)
„ Text shown in blue indicates a cross-reference hyperlink to a Web site or to
another section of this guide. Click the hyperlink to jump to that site or
section. For example:
Visit the QLogic support Web site at support.qlogic.com for the latest
firmware and product updates.
For information on the Virtual Menu, see “Virtual Menu for Adapter
Instance” on page 3-98 .
„ In 3 Interactive Commands , a “breadcrumbs” line follows most command
headings to show you how to access that option; that is, it shows the
hierarchical path from the top level to the command under discussion. For
example, to reach the
Save to Text File options from the main SANsurfer
FC/CNA HBA CLI menu, you would select option
1
to open the General
Information menu,
2
to open the Host Topology menu, and
2
again to see
the Save to Text File options.
The following shows a breadcrumbs example:
1: General Information 2: Host Topology 2: Save to Text File
Related Materials
For additional information, refer to the SANsurfer FC/CNA HBA CLI ReadMe file
and release notes.
License Agreements
Refer to the QLogic Software End User License Agreement for a complete listing
of all license agreements affecting this product.