14
UM Pallet stacker Prmk10-PS v2.0 EN
For a correct insertion, it is necessary to position the pallet correctly on transportation surface
before inserting the clamps... Qimarox advises to use a mechanical pallet stopper and to
center the pallet.
WARNING
Danger of products or pallet falling. Incorrectly inserted pallet clamps
might cause the stack to fall forward or sideways or might cause
products to fall from the top of the stack.
Special attention to the insertion of the fork is need when the pallet load
is wider than the pallet.
WARNING
Danger of products or pallet falling. Always position the pallet on the
transportation surface.
Fork adjustment
To ensure that the pallets are stacked and de-stacked safely, the forks must be adjusted
according to the size of the pallet. See figure and table below for the right fork position.
Pallet width
Position lift fingers
800mm
1
1000mm
2
