20
UM Pallet stacker Prmk10-PS v2.0 EN
Residual risks
The machine is intended to be integrated into an automated pallet conveyor system.
Qimarox has attempted to protect against as many hazards as possible, either though inherent
safe design or by shielding off the dangers. Machine users should be aware of the following
residual risks before working with the machine:
Falling of pallet and products
Pallets or pallet loads/products can fall from the vertical conveyor's carrier. The risk of this
happening is determined by the combination of product, pallet load and pallet (nature and
quality) and the setup and settings of the machine.
In spite of the mandatory area fencing, products can fall outside the fences. The can also be
deflected and change direction by other product or machine parts during their fall. The danger
is also present during the correction of faults, when the area fencing is accessed by an
operator.
The system integrator and operator must determine, before putting the machine into operation,
whether the risk of falling products acceptable.
The following influences ensure that the risk of falling product remains small:
A good quality pallet of the correct dimensions. See section 3.3.6.
A stable, good quality product and pallet load of the good dimensions. See section 3.3.7.
A well set up machine (horizontal transportation surfaces, no height differences).
A machine properly set up for the product.
A correct load clamp insertion and position.
Low speeds and accelerations.
The following influences increase the risk of a falling pallet or pallet load:
Product outside the machine's specifications. See specification sheet.
Products or pallet load unstable or of poor quality.
Stacking different sizes of pallets at the same time.
High speeds and accelerations. An abrupt stop due to motor brake application.
One can reduce the risk of injury with the following measures:
Stacking one size of pallet at the same time.
Area fencing (mandatory) of sufficient height and strength.
Area fencing (mandatory) at a sufficient distance of the falling products. Entering the
fencing must block the machine.
Wearing a safety helmet when entering the fenced area at floor level, near the pallet
stacker (mandatory).
Machine end of life and disposal
Proper use and maintenance of the machine will not involve any environmental risks. When
the machine is no longer useable, the machine should be dismantled and disposed of in an
environmentally responsible manner.
WARNING
