4
UM Pallet stacker Prmk10-PS v2.0 EN
1
About this manual
Introduction
This manual provides information about the pallet stacker Prmk10-PS machine that is used for
loaded pallets on top of each other in a distribution system. Henceforth the Prmk10-PS will be
referred to as the ‘machine’.
The machine is an assembly of two separate modules, the Qimarox vertical conveyor
Prorunner mk10 (without carrier or conveyor) and the stacking module. This manual deals only
with issues concerning the stacking module and the combination of the two machines. For
specific information about the Prorunner mk10, refer to its manual. See section 1.2
Note
Make sure this manual is always available with the machine.
This manual is intended for:
•
Retailers/Original Equipment Manufacturers (OEM), project engineers and mechanics.
•
Operators, installation and maintenance engineers and other users.
It is important to carefully read this manual as soon as possible after purchase of the machine.
Before operating the machine this manual should be read by all users.
System integrators/OEMs
This manual explains machine configurations that can be used to set up the machine. It also
provides mandatory installation instructions for the System integrator/OEM, necessary for the
machine to comply with EU regulations (CE) and instructions for installation of the machine on
site.
To integrate the pallet stacker within a system, refer to the documentation of the Prorunner
mk10
Note
The text of this manual was written assuming that the integrator followed the EC
Installation instructions completely.
Users
This manual gives safety and maintenance instructions and instructions for troubleshooting.
Operating instructions are found in the operating manual (OM) of the system, provided by the
System integrator/OEM.
