Safety
UM Pallet stacker Prmk10-PS v2.0 EN
15
1200mm
3
WARNING
Danger of products or pallet falling. Incorrectly adjusted forks might cause a
pallet to fall from the top of the stack.
Contact Qimarox with any deviation of pallet sizes for the required lift finger position to match
that specific pallet size!
Safety provisions
Safety equipment
Check the correct operation of the safety devices monthly.
You must not disassemble, bypass or disable any safety equipment on the machine.
The machine must not be started and must be immediately taken out of operation if even
a single item of machine safety equipment is defective.
After maintenance tasks are completed, always replace all safety equipment that has
been removed from the machine.
The following safety equipment is part of the machine:
Covers
Safety labels
Emergency stops
Area safety fencing
Safety circuits
Interlocking door switches (and possibly safety light screens)
Safety quick exhaust valve
Some part of the safety equipment may be supplied by the System integrator/OEM. See the
CE installation instructions in in chapter 8. Before the CE Installation instructions have been
met completely, the machine must not be used.
In case of non-compliance with the required safety measures, the EC Declaration of
Conformity will become null and void.
Safety labels
Note
See also the sections about safety labels in the user manuals of the separate
modules.
WARNING
Replace labels on the machine if they become unreadable or damaged.
The following safety labels are present near apertures in the area fencing:
