Safety
UM Pallet stacker Prmk10-PS v2.0 EN
9
Liability
Qimarox believes to the best of its knowledge that the information in this user manual is
accurate. In the event that technical or typographical errors exist, Qimarox reserves the right
to make changes to subsequent editions of this user manual without prior notice to holders of
this edition. The reader should consult Qimarox if errors are suspected. In no event shall
Qimarox be liable for any damages arising out of or related to this user manual or the
information contained in it. Except as specified herein, Qimarox makes no warranties, express
or implied, and expressly disclaims any warranty of non-infringement, merchantability or
fitness for a particular purpose. Customer’s right to recover damages caused by fault or
negligence on the part of Qimarox shall be limited to the amount paid to Qimarox by the
customer. Qimarox shall not be liable for damages resulting from loss of data, profits, use of
products, or incidental or consequential damages, even if advised of the possibility thereof.
This limitation of liability of Qimarox will apply regardless of the form of action, whether in
contract or tort, including negligence. Any action against Qimarox must be brought within one
(1) year after that cause of action accrues. Qimarox is not liable for damages, accidents,
unsafe conditions, defects, malfunctions, or service failures caused by the following:
Owner’s or user’s failure to follow Qimarox’s installation, operation and maintenance
instructions, including but not limited to neglecting warnings or regulations as shown
on the machine or in this manual.
Usage of the machine for other applications, or under other circumstances than
indicated in this user manual. This includes abuse, misuse or negligent acts.
Modifications of any kind to the machine. This includes the replacement of parts with
parts that are not specified in this manual.
Insufficient or improper maintenance.
CE
Qimarox has determined the design of the machine and therefore supplies the EC declaration
of conformity of the machine. The declaration is only valid after the CE Installation instructions
on the EC declaration of conformity have been met completely.
An example of the declaration is given in chapter 8.
For the specific declaration of the machine, refer either to the Specifications sheet or to the
separate document supplied with the documentation of the machine.
3
Safety
Intended use of the pallet stacker
The pallet stacker is exclusively intended to stack loaded pallets on top of each other. The
loaded pallets have to meet the following requirements:
Pallet load must be suitable for stacking,
Top of the bottom pallet load must be flat and level.
The bottom pallet must wide enough, so the top pallet is stable and fully supported
when placed on top.
