![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891015.webp)
1.6.1
Features summary
Picture update with Spe Desktop
The SLATE106 device can be used in
Spe Desktop
mode. The full screen .ppk picture to display can be generated through the USB mass storage thanks to the
SPE_Desktop
tool present on the file system. For further information, refer to the chapter
Picture update with a picture drop through USB
The full screen .ppk picture to display can be generated through the USB mass storage with a simple *.ppk picture dropped from your MS-Windows computer to your
SLATE106 device. In this case, other .ppk file names than
spe.ppk
are supported.
☛
An
img2ppk.exe
tool is provided to create some .ppk picture from any
.PNG
or a
BMP
picture
in the 800x600 resolution (for further information, visit the Qeedji
)
Picture update when paired to a SMH300 hub
When paired to
SMH300
hub, the full screen .ppk picture to display, the application configuration file and the software release are provided by the hub device through
the
WPAN1
.
◬
Do not execute the
APPLI.HTA
application to configure the SLATE106 device when it is paired to a hub, except to repair a SLATE106 configuration.
◬
To support the Right key press detection for
Check Out
button and , and Left key press detection for
Check In
, both the
vibration
detection and the
touch key
detection need to be activated in the
SMH300
hub. For further information, refer to the
SMH300 User manual
.
Message Overlay: partial update with a message when paired to a mobile
When paired to a mobile, the
Slate Message Overlay
mobile application is able to send a message through
WPAN2
, which is then displayed in overlay over the full screen
.ppk picture in a predefined area and for a programmable duration (for further information, refer to the chapter
Slate Message Overlay application
Secondary picture: picture update by a key press
Is is possible to display some alternative full screen .ppk pictures by pressing simply a key on the SLATE106 device. For further information, refer to the chapter
Secondary picture display
.
System configuration
application configuration parameters are stored in the configuration file
. For further information, refer to the chapter
The configuration file
APPLI.CFG
can be modified:
through USB mass storage by executing
APPLI.HTA
. For further information, refer to the chapter
APPLI.HTA configuration tool
or
through WPAN1 if the device is paired to with a SMH300 hub. For further information, refer to the
SMH300 User manual
.
Only the
reset PIN code for WPAN2
(mobile aplication) and the
Date & Time
can by modified by the
Slate Maintainer
mobile application. For further information, refer
to the chapter
Slate Maintainer application (RFU)
.
Application behaviour customization
Once woken-up, the
Pictureframe
application launch sequence of actions. After these actions have completed, the
Pictureframe
application returns in sleep state. This
actions sequence can be customized in the
wake-up source
versus
actions
matrix (for further information, refer to the chapter
).
◬
Except to activate the secondary picture display feature, it is not recommended to modify this matrix configuration without a Qeedji support validation. Indeed some
matrix combinations values may prevent the SLATE106 to work properly.
15