![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891025.webp)
LEDs behaviour
• Step 1: Device start-up initialisation
LEDs
Information
The 3 LEDs are blinking once
Start-up
The left LED is blinking 5 times
Phase 1 to enter in recovery mode ¹
The right LED is blinking 5 times
Phase 1 to enter in recovery mode ¹
The left LED is blinking
The software release upgrading in progress. The duration of this process is depending on the size of the software release
file, and is around 3 minutes
The 3 LEDs are blinking once slowly
There is no valid software on the device. So the device goes into sleep mode, then in recovery mode when an USB cable
will be connected
The 3 LEDs are blinking continuously
and slowly
Error ²
Off
Nominal: no important user information to return
• Step 2: Recovery mode
LEDs
Information
The left LED, and the right LED are turned on
Recovery mode activated
The middle LED is blinking
File copying on SLATE106 through USB
The 3 LEDs are blinking continuously and slowly
Error ²
• Step 3: Application mode
LEDs
Information
The left LED and the right LED are blinking once
Entering in nominal mode
The 3 LEDs are blinking continuously and slowly
Error ²
¹ The phases to enter in recovery mode exist only when an USB cable is connected.
² Error condition has 2 behaviors:
1) If an USB cable is connected, the 3 LEDs are blinking slowly – when the cable is removed, the SLATE106 device is rebooting.
2) If no USB cable is connected, the SLATE106 device is rebooting. If the problem persists, contact the technical support.
25