1.1
Introduction
This manual explains how to setup your device SLATE106. This device is part of the
SLATEs
family. It can be used with or without a SMH300 hub.
Recommendations and warnings
This device is designed to be used inside a building.
This device is a Class A device. In a residential environment this device may cause radio interference. In this case, it is recommended to take appropriate measures.
This device is designed to work with 4 CR2430 batteries. Please refer to the
Batteries
chapter to know the batteries replacement procedure. The batteries lifetime is
estimated to 3 years with 6 daily .ppk picture updates, with Bluetooth Low Energy synchronization with SMH300 device every 15 minutes, 5/7 days, from 8:00 AM to
7:00 PM. The lifetime can be affected when using vibration features.
Keep in mind that this device is an electronics device and may not support inadvertent fall or violent vibration. In case the device has to be installed on a door, you have
to check that any violent vibration won't be generated on the device especially when closing the door. For the same reason, when the optional wake-up by vibration
feature is activated, the vibration generated when opening or closing the door may imply useless wake-up, which is affecting the battery lifetime.
The warranty does not cover the batteries.
Content of the package
Item
Features
Device
SLATE106
Batteries
4 CR2430 batteries with plastic holder
Support
Mounting bracket and cardboard easel
Screw
2 M2.5x25
Adhesive
3M double sided tape (W x H x D): 65 mm x 19 mm x 0.5 mm
4