Execution order
The matrix shows also the order in the time of the actions scheduling.
Mask
This column is showing the equivalent integer values of the default matrix configuration stored in the
APPLI.CFG
configuration file.
(1) : When ```Wait for a delay during WPAN<i>``` is selected, it has 2 different meanings, according to the action(s) done just after:
- If the ```Receive Message Overlay over WPAN<i>``` action is programmed, it just changes the timeout of this action.
- If the ```Folder synchronization over WPAN<i>``` action is programmed, it really waits for the delay before doing the action ```Folder synchronization over WPAN
<i>```, but will do nothing if these action are done before:
- `Send HID key over WPAN1`,
- `Send HID key over WPAN2`,
- `Send HID tag over WPAN1` (RFU),
- `Send HID tag over WPAN2` (RFU).
The action ```Wait for a delay during WPAN<i>``` is ignored if these action are not done
- `Send HID key over WPAN1`,
- `Send HID key over WPAN2`,
- `Send HID tag over WPAN1` (RFU),
- `Send HID tag over WPAN2` (RFU).
33