Fixture
The device must be used indoor and has to be installed using the provided mounting bracket. This support can be fixed using screws (recommended). The screws and
dowels are not delivered with the product. They are depending on your wall material. If it is not possible to fix the device with screws, for example when needing to be
fixed on a glass wall, you can use the provided double-sided tape.
⚠
Clean carefully the surface before stucking the tape.
The SLATE106 device is generally fixed by keeping its bottom at 140 cm far from the floor.
Fix the mounting bracket with the right orientation.
Counterbores are facing to you (to integrate the screw head)
Holes for fixing the SLATE106 are facing downward
Once the mounting bracket is fixed (with some screws or a adhesive tape), place the SLATE106 device face to the mounting bracket. Fix it definitively with the 2 M2.5x25
screws provided using a little slotted screwdriver
:
SLATE106 DRILL PATTERN
screws :
55,6
40
33,5
Ø ≤ 4mm
5mm ≤ Ø ≤ 9mm
Ensure that the holes for fixing the SLATE are facing downward
1
2
11
