1.4
Device installation
Batteries
Place the SLATE106 device, with the back face in front of you.
Keep the battery in its plastic holder like shown below.
CR2430 battery
Battery holder
⚠
Warning: check that the battery is inserted in its holder with the right polarity (positive side facing up). In case the battery is not delivered with its holder,
contact [email protected].
with its holder into its place. Use your finger or a screwdriver to push the plastic of the holder part until you feel a clip, meaning that the battery
is properly installed.
Glide the other batteries with its holder in the right orientation like explained on the picture above:
,
,
4th battery
Once the batteries are installed, they are all hidden.
1
2
CR2430
CR2430
+
+
CR
24
30
+
CR
24
30
+
CR
24
30
+
3
4
5
6
10
