Qeedji SLATE Series, User Manual

Page: 10 / 52

1.4
Device installation
Batteries
Place the SLATE106 device, with the back face in front of you.
Keep the battery in its plastic holder like shown below.
1 CR2430 battery
2 Battery holder
⚠
Warning: check that the battery is inserted in its holder with the right polarity (positive side facing up). In case the battery is not delivered with its holder,
contact support@qeedji.tech.
Glide the 1st battery 3 with its holder into its place. Use your finger or a screwdriver to push the plastic of the holder part until you feel a clip, meaning that the battery
is properly installed.
Glide the other batteries with its holder in the right orientation like explained on the picture above:
2nd battery 4 ,
3rd battery 5 ,
4th battery 6 .
Once the batteries are installed, they are all hidden.
1
2
CR2430
CR2430
+
+
CR
24
30
+
CR
24
30
+
CR
24
30
+
3
4 5
6
10