![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891032.webp)
1.6.4.4
Actions matrix
The action matrix is allowing to
activate the secondary image feature
customize or optimize the pictureframe application behaviour (advanced user only)
The matrix is summarize the activated actions with its order which are done depending on the wake-up sources.
Wake-up sources
When the SLATE106 device is in sleep mode it can be woken up by these different wake-up sources:
After USB MS
: occurs when USB Mass Storage has been mounted first, then after the USB cable is disconnected
After USB Power
: occurs when an USB power bank is connected, and after the USB cable is disconnected
After heartbeat
: occurs each time the heartbeat timer has elapsed (during the active interval)
After NFC Writer
(RFU): occurs each time a NFC writer is detected
After NFC tag
(RFU): occurs each time a NFC tag is detected
After key
: occurs each time a key press is detected
After vibration
: occurs each time a vibration is detected, and when no key is pressed, and NFC tag or NFC writr is not detected is not dectected
After testcard
: occurs each time the testcard timer has elapsed. Note: the testcard needs to be activated.
Wake-up sources
Actions
Af
ter
U
SB
M
S
Af
ter
U
SB
P
ow
er
Af
ter
h
ea
rtb
ea
t
Af
ter
N
FC
w
rit
er
Af
ter
k
ey
Af
ter
N
FC
ta
g
Af
ter
v
ib
ra
tio
n
Af
ter
tes
tc
ar
d
Name
Detail
Ex
ec
ut
io
n
or
der
M
as
k
nfc_writer
tx_hid_key1
tx_hid_tag1
delay1
rx_mo1
folder_sync1
tx_hid_key2
key_lock
tx_hid_tag2
delay2
rx_mo2
folder_sync2
secondary_picture
1
1
2
2
3
4
3
16
4
64
5
256
6
1024
7
8
7
32
8
128
9
512
10
2048
11
4096
Not selectable
Selectable
Selected by default
Unlock/lock keys
NFC writer (NDEF)
Send HID key over WPAN1
Send HID tag over WPAN1
Wait for a delay during WPAN1 (1)
Receive Message Overlay over WPAN1
Folder synchronization over WPAN1 (image, config, firmware)
Send HID key over WPAN2
Send HID tag over WPAN2
Wait for a delay during WPAN2 (1)
Receive Message Overlay over WPAN2
Folder synchronization over WPAN2 (image, config, firmware)
Display secondary .ppk picture instead of standard one (2)
Actions name
key_lock
(RFU): this action allows to decide whether a NFC detection will unlock/lock key detection. If
key_lock
action is activated, the NFC detection has to be
done first. Then the key are unlocked and the key detection can be done.
nfc_writer
(RFU): this action enables the NFC writer detection. If the NFC writer is detected, an URL is sent to the mobile device.
tx_hid_key1
: this action allows to send the detected key pressed value through
WPAN1
.
tx_hid_tag1
(RFU): this action allows to send the detected NFC tag value through
WPAN1
.
delay1
: during the WPAN1 connection, insert a delay (in ms) after the
tx_hid_xxx
actions, and before doing the next action(s).
rx_mo1
: supports for receiving a Message Overlay through
WPAN1
.
folder_sync1
: this action launches the folder synchronization through
WPAN1
from the wpan host to the SLATE106 device. The files to be updated can be: the
configuration file
APPLI.CFG
, the picture
HUB.PPK
picture or the software release files
.rpk
.
tx_hid_key2
: this action allows to send the detected key pressed value through
WPAN2
.
tx_hid_tag2
(RFU): this action allows to send the detected NFC tag value through
WPAN2
.
delay2
: during the
WPAN2
connection, insert a delay (in ms) after the
tx_hid_xxx
actions, and before doing the next action(s).
rx_mo2
: support for receiving a Message Overlay through
WPAN2
.
folder_sync2
(RFU): this action launches the folder synchronization through
WPAN2
from the wpan host to the SLATE106 device. The files to be updated can be:
the configuration file
APPLI.CFG
, the picture
HUB.PPK
picture or the software release files
.rpk
.
secondary_picture
: support for the display of secondary pictures above the nominal one for a programmable duration. The names of the secondary file(s) are
depending on the key detected and the
Touch key
mapping (ex:
F1.ppk
,
F2.ppk
,
F3.ppk
)
32