Qeedji AMP300, User Manual

Page: 32 / 87

32
2.1.3 Device configuration by script
☛ The device can be configured with a configuration script . When it is properly customized and loaded in the device, this configuration script is
allowing to set some preferences values allowing to configure the device. For further information, refer to the chapter Configuration script .
The device configuration by script can be done by different ways:
Device configuration by USB ,
Device configuration by WebDAV ,
Device configuration by server TFTP and server DHCP with code 66 .
Configuration script
The list of the functions supported in the script are shown in the release note Configuration script release note .
The configuration script can be also downloaded at this location.
Rename the configuration script according to the supported filename pattern:
common for multiple AMP300 devices:
configuration.js
,
000000000000.js
,
for a specific AMP300 device:
<device_WLAN0_MAC_address>
with the format
ABCDEFABCDEF.js
.
Edit the configuration script. To customize it according to your needs, uncomment one of the available functions in the
BEGIN of the user
configuration
section by removing the
//
comment symbol.
For example:
/** --------------------------------------
* ---- BEGIN of the user configuration
* ---------------------------------------*/
enableExternalStorageCopyApk(); /* default mode */
//disableExternalStorageCopyApk();
/** --------------------------------------
* ---- END of the user configuration
* ---------------------------------------*/
☛ The number of supported functions can depend on the configuration script version.