Qeedji AMP300, User Manual

Page: 7 / 87

7
1.3 Product faces
Device's front face
1
POWER IN
: USB-C connector supporting power ,
2
LAN/PoE
: RJ45 connector for network connectivity and PoE supply,
3
Tapped hole allowing to lock the USB-C cable on the
POWER IN
USB-C connector,
4
RBT
: hole hidding a push button allowing to reboot the device or exit from kiosk mode.
Device's up face
5
,
6
Drilled holes for fixing the device with screws or cable ties.
Device's bottom face
7
,
8
Drilled holes for fixing the device,
9
,
10
,
11
,
12
Built-in screws (must never been unmounted),
13
Aluminium surface to dissipate the device heat ¹.
¹ It is normal that this aluminium surface is hot, especially when the device is supplied by a PoE way and is supplying at the same time an USB-C
display device.
1
2
3
4
5
6
7
8
9
10
11
12
13