Qeedji AMP300, User Manual

Page: 5 / 87

5
1.1 Introduction
This manual explains how to install and configure your AMP300 device. It explains also how to install a third party APK and realize a AQS firmware
upgrade.
Content of the package
Items Description Quantity
Device AMP300 device with
AQS
¹ embedded 1
USB-A to USB-C cable Lenght: 25 cm (9,84 ") 1
Leaflet Instruction guide 1
¹
AQS
for
Android Qeedji System
Recommendations and warnings
This device is designed to be used indoor and can work 24/7.
The device is delivered without a power supply unit. Depending on your needs,
Qeedji
is explaining different ways to install your device in the
chapter § Power supply .
◬
Before supply the AMP300 device with the USB connector of your computer, check with your computer's manufacturer that the USB
connectors is suitable to deliver a sufficient power.
◬
In case you had to remove the micro SD card, ensure first that the AMP300 device is powered off before removing or inserting the micro SD
card. In case of bad handling, the micro SD card replacement would not be covered by the warranty.
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.