Qeedji AMP300, User Manual

Page: 51 / 87

51
Select one of the detected
WIFI spots SSID
and press on the
Add
button.
The default security is
WPA-Personal (PSK), WPA2-Personal (PSK),
.
☛ The
None
and
WEP
security is not supported in the Web UI but is supported in the AQS. To configure your WLAN interface with a
none
security
or
WEP
security, inject a suitable configuration script with an USB-C storage device.
☛ The
WPA-ENterprise (PSK)
security and
WPA2-Enterprise (PSK)
security are not supported in the Web UI. To configure your WLAN interface
with a
WPA-ENterprise (PSK)
security or a
WPA2-Enterprise (PSK)
security, inject a suitable configuration script with an USB-C storage device.
Fill the crypto key to access to the WIFI spot.
Choose whether the IP address is static or given by the
DHCP
server. If static, fill the remaining parameters like
subnet mask
,
gateway
and
DNS
.
To use a specific
Proxy server
for
WLAN
interface, select the
Manual proxy configuration
in the
Proxy servers
drop down list then enter your proxy
configuration.