Qeedji AMP300, User Manual

Page: 35 / 87

35
Device configuration by WebDAV
Prerequisite:
a WebDAV client (for example, like CarotDAV , BitKinex ) is installed on your computer or
the AMP300 is mounted as a disk on the MS-Windows explorer. For further information, refer to the chapter § Device network disk mounting in
MS-Windows explorer .
☛ The
Web UI Admin
or
WebDAV
credentials put at factory to access to the WebDAV directory is:
admin
/
admin
.
☛ The port value put at factory to access to WebDAV directory is:
80
. The port value can be modified by using a configuration script .
◬
In case you have lost your
Web UI Admin
and
WebDAV
credentials to access to the WebDAV server, the only way to restore some known login
credentials is to install an appropriate configuration script through the USB-C connector ( USB 1 or USB 2 ) and follow the Device configuration
by USB procedure.
☛
https://
scheme to access to the AMP300 is not yet supported.
Copy the configuration script in the
.configuration/
directory located at the root of the AMP300 WebDAV server.
This message is displayed for only few seconds.
Then this message is displayed for less than 5 seconds.