SECTION 2 – COMPONENTS
UL EX3830 ULC EX3830
2014-NOV-10 REV. 06 PagE 2-9
KITCHEN KNIGHT II Restaurant Fire Suppression Manual
CORNER PuLLEYS
Model SBP-1
a corner pulley is used whenever a change in stainless steel
cable direction is required. The Model SBP-1 Corner Pulley (Part
No. 415670) is equipped with a set screw fitting for connection to
1/2 in. EMT conduit. See Figure 2-23.
FIguRE 2-23
000160
Model CBP-1
a corner pulley is used whenever a change in stainless cable
direction is required. The Model CBP-1 (Part No. 423250) is a
grease-tight corner pulley designed for areas likely to experience
excessive deposit build-up. It is equipped with a compression
fitting for connection to 1/2 in. EMT conduit. See Figure 2-24.
Note:
The Model CBP-1 is not a liquid tight seal for penetration
of hoods and/or ducts.
FIguRE 2-24
000161
Model WBP-1
a corner pulley is used whenever a change in stainless cable
direction is required. The Model WBP-1 (Part No. 550982) is
a weather-proof corner pulley designed for areas likely to be
exposed to moisture. It is equipped with female pipe threads for
connection to 1/2 in. rigid conduit. See Figure 2-25.
FIguRE 2-25
006194PC
TEE PuLLEY
The Tee Pulley (Part No. 427929) is used to change the direc-
tion of two wire ropes by 90°. It must be used in areas where the
temperatures are within the range of 32 °F to 130 °F (0 °C to 54
°C). Pulley tees can be used in mechanical gas valve actuation
lines and remote manual pull station lines. Pulley tees cannot be
used within a detection line. See Figure 2-26.
CAuTION
The Tee Pulley must never be used to connect multiple fusible
link lines to a single control head.
FIguRE 2-26
000447
WIRE ROPE
The 1/16 in. diameter stainless steel wire rope must be used
with actuators, detectors and gas valve components requiring a
wire rope connection. The stainless steel wire rope is supplied in
50 ft (15.2 m) lengths with Part No. 15821, and 500 ft (152.4 m)
lengths with Part No. 79653. Refer to the Components List for
part numbers on crimps, stop sleeves, and S-hooks.
